| Code No. SS 510-001 |
: Jig |
| Code No. SS 510-002 |
: Threaded Bolt |
| Code No. SS 510-003 |
: Small Hummer Unit with Nut |
| Code No. SS 510-004 |
: Extractor Rod |
| Code No. SS 510-005 |
: Round Hummer |
| Code No. SS 510-006 |
: Protection Sleeve 12 mm |
| Code No. SS 510-007 |
: Protection Sleeve 10mm |
| Code No. SS 510-008 |
: Drill Sleeve for 4.0mm Drill |
| Code No. SS 510-009 |
: Guide Wire Sleeve 1.8mm for 12mm |
| Code No. SS 510-010 |
: Guide Wire Sleeve 1.8mm for 10mm |
| Code No. SS 510-011 |
: Pointer Long |
| Code No. SS 510-012 |
: T-Handle |
| Code No. SS 510-013 |
: Spanner Ordinary (18 x 19) 01 |
| Code No. SS 510-014 |
: Spanner Ordinary (18 x 19) 02 |
| Code No. SS 510-015 |
: C.C Screw Driver for 5.0mm Hex (Long) |
| Code No. SS 510-016 |
: Guide Wire Simple 2.0mm x 16” Long 01 |
| Code No. SS 510-017 |
: Guide Wire Simple 2.0mm x 16” Long 02 |
| Code No. SS 510-018 |
: Guide Wire Threaded 2.0mm x 16” Long 01 |
| Code No. SS 510-019 |
: Guide Wire Threaded 2.0mm x 16” Long 02 |
| Code No. SS 510-020 |
: C.C Drill Bit Long With Q/C for 8.0mm Screw |
| Code No. SS 510-021 |
: C.C Drill Bit Long With Q/C for 6.2mm Screw |
| Code No. SS 510-022 |
: C.C. Reamer with Q/C 15mm |
| Code No. SS 510-023 |
: T-Handle for Drill Bits / Taps Q/C |
| Code No. SS 510-024 |
: Depth Gauge (Long) |
| Code No. SS 510-025 |
: Screw Driver for 4.5mm Hex (Long) |
| Code No. SS 510-026 |
: K. Nail Awl Diamond Pointer |
| Code No. SS 510-027 |
: K. Nail Tissue Protector |
| Code No. SS 510-028 |
: Drill Bits S.S. 4mm x 10” |
| Code No. SS 510-029 |
: Box for Nail & Instruments (18 Inch) |
